СКУ: BSH0551P22F2A
AC серво двигател BSH-0.5 N.m-4000 rpm-вал без шпонка-със спирачка-IP65
-
Brand
Schneider Electric
-
Number of phases
3
-
Voltage type
EV000460
-
Rated frequency
50
-
Rated voltage
480
-
Material housing
EV000154
-
Operating temperature
-
Construction type
EV000154
-
Number of poles
6
-
Bearing
EV000154
-
Model
EV006582
-
Motor efficiency class
EV000154
-
Overload capability
FALSE
-
Cooling method
EV000154
-
Vacuum pressure impregnation (VPI)
EV000154
-
With positive temperature coefficient resistor (PTC)
FALSE
-
With resistance temperature detector (RTD)
FALSE
-
Intrinsic safety (IS)
EV000494
-
Suitable for frequency control
FALSE
-
With anti-condensation
FALSE
-
Duty cycle
EV000154
-
Rated rotational speed at rated frequency
8000
-
Starting torque ratio
-
Breakdown torque ratio
-
Starting current ratio
-
Insulation class according to IEC
EV000154
-
Shaft end type
EV011475
-
Degree of protection (IP)
EV006612
-
Rated performance at rated frequency
0.15
-
Nominal torque
0.43
This product is part of the Lexium SD3 range, an offer of stepper motors for motion control. The 6-pole stepper motor with 19mm parallel key shaft, centering collar of 56mm, without holding brake and second shaft end. It is a 3-phase stepper motor with a rated current of 4.1A, a mechanical speed of 3000RPM and a supply voltage of 230V AC, 325V DC. It is furnished with terminal box for electrical connection. The shaft dimensions are 19mm (diameter) x 40mm (length). It offers service life of about 20,000 hours (bearing). It is an IP41 and IP56 rated product. Its dimensions are 180mm (length) and the centering collar dimensions are 3mm (depth) x 56mm (diameter) with 125.86mm mounting hole. It weighs 8.2kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, food and beverage applications. It meets EN 50347 and IEC 60072-1 standards. This stepper motor is compatible with Lexium SD3 motor drives. It supports 110mm flange mount with a natural convection cooling system. It has 4 mounting holes with 9mm diameter. The SD3 is a universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Lexium SD3, three-phase range up to 19.7Nm with high accuracy and high torque at low rotation speeds.
Similar