СКУ: AP8760
Захранващ кабел, заключващ C19 до C20, 3,0 м
-
Brand
APC Brand
-
Frequency
50
-
Nominal voltage
230
-
Degree of protection (IP)
EV000154
-
Nominal current
16
-
Material outer sheath
EV000494
-
Length
3
-
Colour outer sheath
EV000206
-
Euro class acidity according to EN 13501-6
EV000494
-
Number of cores
1
-
Connection 1
EV000154
-
Connection 2
EV000154
-
With protective conductor
FALSE
-
Outer diameter approx.
-
Spiralized cable
FALSE
-
Temperature resistance
90
-
Smoke development class according to EN 13501-6
EV000494
-
Reaction-to-fire class according to EN 13501-6
EV000494
-
With cord switch
FALSE
-
Nominal cross section conductor
-
Oil resistant (according to EN 60811-404)
TRUE
-
Connector system system-oriented
TRUE
-
Euro class flaming droplets/particles according to EN 13501-6
EV000494
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Similar
Products
Recently viewed
