СКУ: 170ENT11001
SCHNEIDER ELECTRIC Ethernet communication adaptor Modicon Momentum - 10/100 Mbit/s
-
Brand
Schneider Electric
-
Supporting protocol for SERCOS
FALSE
-
SIL according to IEC 61508
EV000494
-
System accessory
TRUE
-
Performance level according to EN ISO 13849-1
EV000494
-
Radio standard GPRS
FALSE
-
Supporting protocol for INTERBUS-Safety
FALSE
-
Supporting protocol for AS-Interface Safety at Work
FALSE
-
Radio standard GSM
FALSE
-
Explosion safety category for dust
EV000494
-
Radio standard UMTS
FALSE
-
Explosion safety category for gas
EV000494
-
Supporting protocol for DeviceNet Safety
FALSE
-
Supporting protocol for Foundation Fieldbus
FALSE
-
Supporting protocol for SafetyBUS p
FALSE
-
Voltage type of supply voltage
EV000461
-
Supporting protocol for PROFINET CBA
FALSE
-
Supporting protocol for PROFINET IO
FALSE
-
Supporting protocol for PROFIsafe
FALSE
-
Supporting protocol for ASI
FALSE
-
Radio standard Bluetooth
FALSE
-
Appendant operation agent (Ex ia)
FALSE
-
Radio standard Wi-Fi 802.11
FALSE
-
Front built-in possible
FALSE
-
Supporting protocol for KNX
FALSE
-
Supporting protocol for CAN
FALSE
-
Appendant operation agent (Ex ib)
FALSE
-
IO link master
FALSE
-
Suitable for safety functions
FALSE
-
Supporting protocol for Data-Highway
FALSE
-
Supply voltage DC
24
-
Supporting protocol for LON
FALSE
-
Supporting protocol for other bus systems
TRUE
-
Supporting protocol for SUCONET
FALSE
-
Degree of protection (IP)
EV000154
-
Rail mounting possible
TRUE
-
With optical interface
FALSE
-
Depth
40
-
Number of HW-interfaces parallel
-
Number of interfaces PROFINET
-
Number of HW-interfaces other
-
Number of HW-interfaces serial TTY
-
Number of HW-interfaces Wireless
-
Supporting protocol for EtherNet/IP
TRUE
-
Supporting protocol for TCP/IP
TRUE
-
Supporting protocol for Modbus
TRUE
-
Number of HW-interfaces RS-422
-
Wall mounting/direct mounting
TRUE
-
Number of HW-interfaces industrial Ethernet
-
Number of HW-interfaces USB
-
Number of HW-interfaces RS-485
-
Number of HW-interfaces RS-232
-
Width
125
-
Rack-assembly possible
TRUE
-
Suitable for weighing
FALSE
-
Suitable for temperature control
FALSE
-
Suitable for NC
FALSE
-
Suitable for welding control
FALSE
-
Suitable for pressure control
FALSE
-
Suitable for electronic positioning
FALSE
-
Suitable for CNC
FALSE
-
Suitable for detection absolute value
FALSE
-
Suitable for flux controller
FALSE
-
Suitable for flux measurement
FALSE
-
Suitable for path controller
FALSE
-
Suitable for cam controller
FALSE
-
Fieldbus connection over separate bus coupler possible
TRUE
-
Number of functions
1
-
Suitable for counting
TRUE
-
Height
141.5
-
Suitable for single-axis positioning
TRUE
-
Suitable for single-axis controller
TRUE
-
Suitable for multi-axis positioning
TRUE
-
Frequency measurement
TRUE
-
Function block automatic reset
TRUE
-
Function block contactless working protection installation
FALSE
-
Function block emergency stop
FALSE
-
Supporting protocol for PROFIBUS
TRUE
-
Function block restart blockage
TRUE
-
Function block access control
TRUE
-
Function block affirm pushbutton
TRUE
-
Suitable for SSI
TRUE
-
Supporting protocol for INTERBUS
TRUE
-
Function block operating mode selection
TRUE
-
Supporting protocol for DeviceNet
TRUE
-
Suitable for incremental data detection
TRUE
-
Function block 2-hand switching
FALSE
-
Contactor control function block
FALSE
-
Suitable for flying saw
TRUE
-
Suitable for multi-axis control
TRUE
This product belongs to the Harmony XPSU range of safety relays. It monitors E-stop, guard/magnetic/RFID switches, PNP sensors, light curtains & two-hand controls. The safety relay is powered with 24V AC/DC, and equipped with a spring removable terminal block. This universal safety module embeds pre-defined safety functions, or selectable safety functions via rotary selectors. It features 1 safety input, 2 configurable ON/OFF pulsed outputs, 1 changeover safety output, and 1 solid-state diagnostic output. The maximum safety level achieved by this safety relay is PLc conforming to ISO 13849-1, SILCL 1 conforming to IEC 62061 and SIL 1 conforming to IEC 61508. It weighs 0,200kg and measures 22,5mm (Width) x 120mm (Depth) x 100mm (Height). This safety relays is suitable for applications such as Food and Beverage, Hoisting, Material Handling, Material Working, Packaging. It conforms to IEC60947-5-1, IEC61508-1/2/3, ISO13849-1, IEC62061 functional safety standards, is certified by cULus, TÜV, EAC, CCC and KC marking. Harmony safety relays are compatible with Modicon logic controllers. This relay is mounted on a 35mm symmetrical DIN rail. Harmony XPS Basic and Universal relays simplify single safety function management for machines of low to medium complexity. Harmony XPS Universal is the first choice for a broad range of simple to mid-complex machines.
Similar
Products
Recently viewed