стоманен монтажен комплект, Altivar Process Modular, за стандартен захранващ модул, табло интеграция, дълбочина 950mm | Spark & Co
  • 3D
|

СКУ: VW3A99ACFEC01

стоманен монтажен комплект, Altivar Process Modular, за стандартен захранващ модул, табло интеграция, дълбочина 950mm

  • Brand
    Schneider Electric
  • Explosion-proof
    FALSE
  • Surface protection
    EV006034
  • Suitable for manual operation
    TRUE
  • Position reporting system
    EV000494
  • Ambient temperature
    -10
  • Auxiliary contacts
    FALSE
  • Adjustable operating range
    FALSE
  • With coupling connection 1
    FALSE
  • With coupling connection 2
    FALSE
  • Flange compression class
    EV020104
  • Leakage loss of Kvs value
    0.01
  • Height
    600
  • Adjustable position feedback signal
    FALSE
  • Control signal
    EV021430
  • With end contacts
    FALSE
  • Article compression class
    EV020104
  • Max. medium temperature (continuous)
    120
  • Min. medium temperature (continuous)
    -10
  • Material quality
    EV020188
  • Housing material
    EV000117
  • Connections
    EV000106
  • Zero-pressure return flow
    EV000494
  • Closing pressure
    16
  • Characteristic curve
    EV020004
  • Max. pressure difference in opened position
    16
  • Outer pipe diameter all connections
    200
  • Width
    950
  • Nominal diameter
    EV020220

The VZ208 is a short stroke and small linear zone valve designed for control of hot and chilled water. The valve is used with a thermo-electric actuators type MZ140. The valves utilise a double O-ring design on the plug to ensure a leak tight seal on both valve ports, this ensures no loss of energy leakage through the valve. It is a BSP male threaded valves with flat face seals, a range of connection sets are available to mate onto pipe. DN20, Kvs: 6. m³/h. Two-way valve, Normally closed without actuator fitted. Pressure class PN16, stroke 2.5 mm. It is recommended to fit a strainer upstream of the valve to increase reliability and to follow water treatment guidelines as detailed in VDI 2035. Valves should be installed in the return pipe to reduce exposure to media temperature extremes.

Similar

Products

Recently viewed

Products