Комуникационен модул, COM BCM ULP, фиксиран ComPact NS630b до NS600, ръчно управление

This is a chassis for 3 poles ComPacT NS and MasterPact NT drawout circuit breakers and switch disconnectors. This chassis is adapted to drawout MasterPact NT16 H1/H2 and MasterPact NT06/NT10 L1 circuit breakers. This chassis is adapted to drawout MasterPact NT16 HA switch disconnectors. This chassis is adapted to withdrawable ComPacT NS1600 N/H and ComPacT NS630b/NS1000 L circuit breakers. This chassis is adapted to withdrawable ComPacT NS1600 NA switch disconnectors. This multifunctional chassis is particularly suited for incoming devices. It allows the device connection and disconnection through a door, using a crank that can be stored in the chassis. It indicates three positions of the device (connected, test and disconnected) that are indicated locally by a position indicator or remotely by a carriage switch. It enables circuit breaker ON/OFF commands through a switchboard front panel. There are several extensive locking possibilities of the chassis. A mismatch protection ensures that a circuit breaker is installed only in a chassis with compatible characteristics. This chassis is for 3 poles devices. It is compliant with IEC 60947-1 and IEC60947-2 international standards. MasterPact NT and ComPacT NS can be integrated within Schneider Electric EcoStruxure Power architecture. MasterPact NT and ComPacT NS are part of the global Schneider Electric Environmental Program.