Advanced control unit, TeSys Ultra, 1P, 0.35 to 1.4A, protection & diagnostic, class 10, 24VAC coil | Spark & Co
  • 3D
|

СКУ: LUCC1XB

Advanced control unit, TeSys Ultra, 1P, 0.35 to 1.4A, protection & diagnostic, class 10, 24VAC coil

  • Brand
    Schneider Electric
  • Number of poles
    3
  • Voltage type for actuating
    EV000460
  • Rated control supply voltage Us at AC 50HZ
    24
  • Rated control supply voltage Us at AC 60HZ
    24
  • Type of motor protection
    EV014005
  • With ground fault protection function
    TRUE
  • Short-circuit release function
    EV003978
  • Initial value of the undelayed short-circuit release - setting range
    18
  • End value adjustment range undelayed short-circuit release
    18
  • Overload release current setting
    0.35
  • Rated permanent current Iu
    1.4

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB120, LUB320, LUB380 to form a TeSys U starter controller, for 1-phase motor applications up to 0.09kW@400V. It provides full protection to motors with a rated current Ir 0.35-1.4A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 24V AC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine).

Similar

Products

Recently viewed

Products