СКУ: 56054
SCHNEIDER ELECTRIC Rectangular sensor L2 type, Vigirex, 470 mm X 160 mm, 1600A
-
Brand
Schneider Electric
-
Number of contacts as normally open contact
1
-
Voltage type for actuating
EV000460
-
Number of contacts as change-over contact
1
-
Error registration possible
FALSE
-
Indication of difference current
FALSE
-
Function
EV005827
-
With detachable clamps
FALSE
-
Rated frequency
50
-
Max. permitted delay-on energization time
0.04
-
Rated control supply voltage Us at AC 50HZ
110
-
Rated control supply voltage Us at AC 60HZ
110
-
Response value amperage 1
500
-
Width
72
-
Type of electric connection
EV005755
-
Depth
78
-
Height
72
-
Number of contacts as normally closed contact
-
Rated voltage
-
Min. adjustable delay-on energization time
VigiPacT RH10M is a DIN rail mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 12/24VAC 50/60Hz, or 12/48VDC. It is a type A earth-leakage protection class. The current sensitivity (IDn) is fixed to 300mA. The time delay (Dt) is instantaneous. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000VAC 50/60/400Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor.
Similar
Products
Recently viewed
