СКУ: LX4FK100
COIL TeSys F
-
Brand
Schneider Electric
-
Rated voltage
240
-
With auto test for earth leakage function
FALSE
-
Width in number of modular spacings
0.5
-
Suitable for max. number of poles main contact unit (total)
4
-
Number of fault-signal switches
1
-
Voltage type for actuating
EV000509
-
Installed at the factory
FALSE
-
Number of contacts as change-over contact
2
-
Number of contacts as normally closed contact
-
Number of contacts as normally open contact
-
Device fitting
EV009775
-
Additional equipment
EV009833
-
Suitable for max. current main contact unit
63
-
Rated switch current
0.1
This PrismaSeT XS enclosure is a surface mounted distribution enclosure. This metal and plastic enclosure is composed of 5 rows of 24 modules of 18mm. It can accomodate all types of modular switchgear. This enclosure is dedicated to indoor installation. The IP degree of protection is IP40 closed door. It is provided with a plain door. The colour of the enclosure, the front plate and the door is white (RAL 9003). This ready-to-use enclosure is intended in residental and tertiary sectors. It is devised for electricians, providing ergonomics and flexibility of installation. The cables can enter via the top or bottom of the enclosure by removable cable entry plates. It enables entry by cable, tube or trunking. It is equipped with 1 back plate and 5 DIN rails. The rails are removable and facilitate wiring and maintenance operations. It comes with 1 earth and 1 neutral terminal block. The earth terminal block provides 62 outgoers (9x25mm² + 53x4mm²). The neutral terminal block provides 84 outgoers (6x (3x25mm² + 11x4mm²)). It can also accommodate a vertical Acti9 VDIS distributor 24 modules size. It is provided with 5 identification labels, 5 label protectors, 2 blanking plate strips and some cable fixing hardware. The electrical insulation class is class II. The Ui rated insulation voltage is 400V. The overvoltage category is II. The In rated current is up to 125A. The dissipated power is 94W. It complies with the IEC 60670-1 and -24 standards. The total dimensions are (W) 550mm x (H) 900mm x (D) 168mm. The product weight is 17.050kg. The enclosure and the front plate are made of technoplastic. The back part and the door are made of metal. The resistance of the plastic to flames and to abnormal heat is 650°C for the enclosure and the front plate. The IK degree of protection is IK09 with closed door. The operating temperature are -25°C to 60°C.
Similar