Cen.pla. USB charger TPb bl SysM

Schneider Electric Merten insert M USB charger MEG4366-0120 is a device with fixing frame and claws with 2 USB outputs A+C, allowing charging for mobile/tablet and notebook and notebook devices. The input voltage of this device is 240V. The power consumption is below 0,1W and the nominal output power of this USB charger is 45W with PD technology. The output Voltage and related current will be automatically adapted by PD protocol by 5V/3A | 9V/3A 12V/3A 15V/3A | 20V/2.25A for USB C and 5V 1.5A 7.5W for USB A. In addition, the rated operationalVoltage of this device is between 220 Volt and 240 Volt. The outputVoltage of this device is 5 Volt. The protection type of this USB charger is electronic overload and temperature protection, improving safety level. Its fixing mode is by screws. Its mounting box can be recessed into the surface with flush type. It is 51 mm in width, 40.7 mm in height, 30 mm in depth, with an embedding depth of 30.8 mm. This USB charger is very robust, with 30000 hours of service life. Besides, it reaches IK04 protection level, protecting against 0.5 joules of impact. This USB charger reaches IP20 against solid objects and liquids. What's more, it's directives are 2002/95/EC - Ro. HS directive, 2002/96/EC - WEEE directive, 2004/108/EC - electromagnetic compatibility, 2006/95/EC - low voltage directive. Also, being environment-friendly, this device reached Regulation (EC) No 1907/2006. The USB charger is made of PC (polycarbonate) GF10 FR, making it as resistant as possible. It obtained EAC certificate as well. What's more, it well satisfied the standards of EN 60950-1, EN 62684, ETSI EN 301 489-4. System M range is based on 4 different surfaces and materials. With 9 different design variations and over 280 functions, the system can meet any customer demand.