Автоматичен прекъсвач NSX250S 100kA DC 3P 250A без изключвателно устройство | Spark & Co
  • 3D
  • 3D
|

СКУ: C25S3D

Автоматичен прекъсвач NSX250S 100kA DC 3P 250A без изключвателно устройство

  • Brand
    Schneider Electric
  • Type of electrical connection of main circuit
    EV000415
  • Number of poles
    3
  • Device construction
    EV009211
  • Motor drive integrated
    FALSE
  • Rated permanent current Iu
    160
  • Complete device with protection unit
    FALSE
  • Type of control element
    EV000421
  • Position of connection for main current circuit
    EV007926
  • Integrated earth fault protection
    FALSE
  • Motor drive optional
    TRUE
  • Suitable for DIN rail (top hat rail) mounting
    FALSE
  • With switched-off indicator
    TRUE
  • With integrated under voltage release
    FALSE
  • Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
    100
  • DIN rail (top hat rail) mounting optional
    TRUE
  • Number of auxiliary contacts as normally closed contact
  • Number of auxiliary contacts as change-over contact
  • Number of auxiliary contacts as normally open contact
  • Rated voltage
    750
  • Degree of protection (IP)
    EV006414

This component is an interchangeable plug for MicroLogic control units. It is used to limit the long-time threshold setting range for higher accuracy (pick-up and delay). The long-time pickup switch sets the maximum current level (Ir) the circuit breaker will carry continuous within the range 0.4 to 1 x In. There are 9 possible settings (0.4 , 0.5 , 0.6 , 0.7 , 0,8 , 0.9 , 0.95 , 0.98 , 1). The long-time delay switch sets the length of time that the circuit breaker will carry a sustained overload before tripping. Delay bands are labelled in seconds of overcurrent at six times the ampere rating (6 x Ir). ComPacT NS new generation is part of Schneider Electric EcoStruxure Power architecture. ComPacT NS new generation is more sustainable with green packaging and green partnerships.

Similar

Products

Recently viewed

Products