|
СКУ: 29377
Автоматичен контролер - 380..415 V
-
Brand
Schneider Electric
-
Type of electrical connection of main circuit
EV000415
-
Version as emergency stop installation
FALSE
-
Version as reversing switch
FALSE
-
Suitable for front mounting centre
TRUE
-
Max. rated operation voltage Ue AC
690
-
Number of poles
3
-
Voltage release optional
FALSE
-
Device construction
EV009211
-
Version as safety switch
FALSE
-
Rated operating voltage
690
-
Suitable for front mounting 4-hole
TRUE
-
Number of switches
1
-
Motor drive integrated
FALSE
-
Suitable for intermediate mounting
FALSE
-
Motor drive optional
FALSE
-
Rated operation power at AC-23, 400 V
45
-
Version as main switch
TRUE
-
Interlockable
TRUE
-
Version as maintenance-/service switch
TRUE
-
Colour control element
EV000206
-
Suitable for distribution board installation
TRUE
-
Type of control element
EV004095
-
Conditioned rated short-circuit current Iq
36
-
Number of auxiliary contacts as change-over contact
2
-
Degree of protection (IP), front side
EV006415
-
Suitable for floor mounting
TRUE
-
Rated permanent current Iu
100
-
Rated permanent current at AC-23, 400 V
100
-
Rated short-time withstand current lcw
8.5
-
Number of auxiliary contacts as normally closed contact
-
Number of auxiliary contacts as normally open contact
It is an automatic UA controller of source changeover system for ComPact NSX, ComPact NS and MasterPact devices. It allows the transfer from one source to another one, the engine generator set start-up and the load shedding. It may be installed directly on the Transferpact ACP control plate or mounted on the front panel of the switchboard. The control voltage is from 380VAC to 415VAC 50/60Hz, or 440VAC 60Hz.
Similar
Products
Recently viewed