APC блок за разпределение на захранване за монтаж в рак 2G, с измерване, ZeroU, 32A, 230V, (36) C13 и (6) C19 | Spark & Co
  • 3D
  • 3D
|

СКУ: AP8853

APC блок за разпределение на захранване за монтаж в рак 2G, с измерване, ZeroU, 32A, 230V, (36) C13 и (6) C19

  • Brand
    APC Brand
  • Colour
    EV000206
  • Width
    56
  • Type of electric connection
    EV000154
  • Mounting direction
    EV001302
  • With meter
    TRUE
  • Number of other socket outlets
  • Mounting dimension (standardised)
    EV000154
  • Number of socket outlets with earth pin
  • Ampere meter
    TRUE
  • Electrical connection
    EV020299
  • Number of UK BS1363 sockets
  • Evaluation
    EV000154
  • Mains filter
    FALSE
  • Control function
    TRUE
  • With LED indication
    FALSE
  • Interface ethernet
    TRUE
  • Temperature measurement
    FALSE
  • With mounting material
    TRUE
  • With fuse
    TRUE
  • SNMP
    TRUE
  • Switchable
    TRUE
  • Number of C20 socket outlets
  • Number of height units
  • Number of socket outlets Swiss standard type 25
  • Number of socket outlets Swiss standard type 23
  • Number of socket outlets Swiss standard type 15
  • Number of socket outlets Swiss standard type 13
  • With display
    TRUE
  • Cable length
    1.8
  • Supply voltage
    400
  • Depth
    44
  • Number of C19 socket outlets
    6
  • Number of socket outlets with protective contact (SCHUKO)
    36
  • Height
    1791
  • Number of C13 socket outlets
    36

APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Similar

Products

Recently viewed

Products