Acti9 Smartlink - Modbus RS485 slave - smart communication I/O module

The I/O Smart Link Modbus is a communication module with 11 channels. It communicates with the auxiliaries iACT24 for iCT contactors, iATL24 for iTL impulse relays, iOF+SD24 for iC60, iID, ARA, RCA & iSW-NA. It needs to be associated to a EcoStruxure Panel Server PAS600 or PAS800, thanks to the Modbus RS485 network. It is used to transfer data from Acti 9 devices to a PLC or network monitoring system thanks to the Ethernet network. It communicates also with OF+SD24 for C60, C120, DPN, ID & C60H-DC, Ti24 for RCA iC60 & Reflex iC60. It is supplied with 1 power supply network 24VDC, 2 bolts for mounting on Linergy FM80. The link is Modbus, RTU, RS485 serial connection. The transfer rate is self-adaptable from 9600 to 38400 baud. The Modbus addresing range is 1 to 99. It is a 4-wire RS485 type of bus. It is a plug-in connection. The maximum length of the bus is 1000m. The maximum length of cable and cordsets is 500m. The voltage power supply is 24VDC +/- 10%. The Maximum input current is 1,5A. The Maximum inrush current is 7A. The degree of protection is IP20. The pollution degree is 3. It complies with RoHS directive. The duration of saving memory is 10 years. The dimensions are 359 millimeters in width, 23 millimeters in height and 42 millimeters in depth. The weigth is 188g. The operating temperature is -25°C to + 60°C and only +50°C if vertical mouting. The storage temperature is -40°C to + 80°C. This product complies with IEC61010-2-201 standard.